Packer Plugin Builder ARM

This plugin allows you to build or extend ARM system images. It operates in three modes:

new - creates empty disk image and populates the rootfs on it
reuse - uses already existing image as the base
resize - uses already existing image but resize given partition (ie. root)

Plugin mimics standard image creation process, such as:

building base empty image (dd)
partitioning (sgdisk / sfdisk)
filesystem creation (mkfs.type)
partition mapping (losetup / kpartx)
filesystem mount (mount)
populate rootfs (tar/unzip/xz etc)
setup qemu + chroot
customize installation within chroot

The virtualization works via binfmt_misc kernel feature and qemu.

Since the setup varies a lot for different hardware types, the example configuration is available per "board". Currently the following boards are supported (feel free to add more):

bananapi-r1 (Archlinux ARM)
beaglebone-black (Angstrom, Archlinux ARM, Debian)
jetson-nano (Ubuntu)
odroid-u3 (Archlinux ARM)
odroid-xu4 (Archlinux ARM, Ubuntu)
parallella (Archlinux ARM, Ubuntu)
raspberry-pi (Archlinux ARM, Raspbian, Raspberry Pi OS Lite)
raspberry-pi-3 (Archlinux ARM (armv8), Raspberry Pi OS Lite (arm64))
raspberry-pi-4 (Archlinux ARM (armv8), Ubuntu 20.04 LTS)
rock-4b (Debian, via Radxa debos image)
wandboard (Archlinux ARM)
armv7 generic (Alpine, Archlinux ARM)
armv8 generic (Archlinux ARM)

Quick start

git clone https://github.com/mkaczanowski/packer-plugin-builder-arm
cd packer-plugin-builder-arm
go mod download
go build -o packer-plugin-builder-arm

# register the locally-built plugin with packer (one-time, or whenever you rebuild)
packer plugins install --path ./packer-plugin-builder-arm github.com/mkaczanowski/arm

sudo -E packer build boards/odroid-u3/archlinuxarm.json

Since this is a multi-component plugin, HCL2 templates should declare it in a required_plugins block so packer init knows what version is expected:

packer {
  required_plugins {
    arm = {
      source  = "github.com/mkaczanowski/arm"
      version = ">= 1.0.9"
    }
  }
}

Legacy JSON templates ("type": "arm" builders) don't support required_plugins, but work the same way once the plugin has been installed with packer plugins install.

Run in Docker

This method is primarily for macOS users, where there is no native way to use qemu-user-static, loop mount Linux specific filesystems and install all above mentioned Linux specific tools (or for Linux users, who do not want to set up packer and all the tools).

The container is a multi-arch container (linux/amd64 or linux/arm64), that can be used on Intel (x86_64) or Apple M1 (arm64) Macs and also on Linux machines running linux (x86_64 or aarch64) kernels.

NOTE: On Macs: Don't run go build . (that produces a darwin binary) and then run below docker run ... commands from the same folder to avoid the error error initializing builder 'arm': fork/exec /build/packer-plugin-builder-arm: exec format error (linux packer process within docker fails to load the outside container compiled packer-plugin-builder-arm binary due to being a darwin binary). Delete any local binary via rm -r packer-* to solely use the binary already included and provided by the container.

Usage via container from Docker Hub:

Pull the latest version and capture its immutable digest:

IMAGE=mkaczanowski/packer-plugin-builder-arm:latest
docker pull "${IMAGE}"
VERIFIED_IMAGE=$(docker image inspect "${IMAGE}" --format '{{index .RepoDigests 0}}')

The published images are signed with cosign (keyless, via GitHub Actions OIDC). Since the container runs with --privileged and -v /dev:/dev, verify the immutable image before running it:

cosign verify "${VERIFIED_IMAGE}" \
  --certificate-identity-regexp='^https://github\.com/mkaczanowski/packer-plugin-builder-arm/\.github/workflows/docker\.yml@refs/(heads/master|tags/v[^/]+)$' \
  --certificate-oidc-issuer=https://token.actions.githubusercontent.com

Build a board using the verified digest:

docker run --rm --privileged -v ${PWD}:/build "${VERIFIED_IMAGE}" build boards/raspberry-pi/raspbian.json

Build a board with more system packages (e.g. bmap-tools, zstd) can be added via the parameter -extra-system-packages=...:

docker run --rm --privileged -v ${PWD}:/build "${VERIFIED_IMAGE}" build boards/raspberry-pi/raspbian.json -extra-system-packages=bmap-tools,zstd

NOTE: In the IMAGE variable, latest can also be replaced via e.g. 1.0.3 to get a specific container version.

The images also carry build provenance attestations (source repo, commit, builder), inspectable via:

docker buildx imagetools inspect mkaczanowski/packer-plugin-builder-arm:latest --format "{{ json .Provenance }}"

Usage via local container build (supports amd64/aarch64 hosts):

Build the container locally:

docker build -t packer-plugin-builder-arm -f docker/Dockerfile .

Run packer via the local built container:

docker run --rm --privileged -v ${PWD}:/build packer-plugin-builder-arm build boards/raspberry-pi/raspbian.json

Dependencies

sfdisk / sgdisk
kpartx
e2fsprogs
parted (resize mode)
resize2fs (resize mode)
qemu-img (resize mode)

Configuration

Configuration is split into 3 parts:

remote file config
image config
qemu config

Remote file

Describes the remote file that is going to be used as base image or rootfs archive (depending on image_build_method)

"file_urls" : ["http://os.archlinuxarm.org/os/ArchLinuxARM-odroid-xu3-latest.tar.gz"],
"file_checksum_url": "http://hu.mirror.archlinuxarm.org/os/ArchLinuxARM-odroid-xu3-latest.tar.gz.md5",
"file_checksum_type": "md5",
"file_unarchive_cmd": ["bsdtar", "-xpf", "$ARCHIVE_PATH", "-C", "$MOUNTPOINT"],
"file_target_extension": "tar.gz",

Downloads of the file_urls are done with the help of github.com/hashicorp/go-getter, which supports various protocols: local files, http(s) and various others, see https://github.com/hashicorp/go-getter#supported-protocols-and-detectors). Downloading via more protocols can be done by using other tools (curl, wget, rclone, ...) before running packer and referencing the downloaded files as local file in file_urls.

The file_unarchive_cmd is optional and should be used if the standard golang archiver can't handle the archive format. The variables ($ARCHIVE_PATH, $MOUNTPOINT/$TMP_DIR) are also substituted when embedded within an argument, e.g. "file_unarchive_cmd": ["7z", "x", "$ARCHIVE_PATH", "image.img", "-o$TMP_DIR"].

Raw images format (.img or .iso) can be used by defining the file_target_extension appropriately.

Some mirrors reject requests carrying the default HTTP client User-Agent. In that case, set file_user_agent to override it, e.g. "file_user_agent": "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:128.0) Gecko/20100101 Firefox/128.0".

Image config

The base image description (size, partitions, mountpoints etc).

"image_build_method": "new",
"image_path": "odroid-xu4.img",
"image_size": "2G",
"image_type": "dos",
"image_partitions": [
    {
        "name": "root",
        "type": "8300",
        "start_sector": "4096",
        "filesystem": "ext4",
        "size": "0",
        "mountpoint": "/"
    }
],

The plugin doesn't try to detect the image partitions because that varies a lot. Instead it solely depends on the image_partitions specification, so you should set that even if you reuse the image (image_build_method = reuse).

Filesystem labels and UUIDs

In new mode, filesystem_make_options passes flags to mkfs. For FAT, use filesystem = "fat" with filesystem_make_options = ["-n", "BOOT"]. For ext4, filesystem_make_options = ["-L", "ROOT", "-U", "<unique-uuid>"] sets both values. See the mkfs.vfat/mke2fs man pages for other flags.

reuse and resize preserve existing identifiers. Filesystem UUIDs are not partition-table PARTUUIDs; change the DOS/MBR disk ID with sfdisk --disk-id, or a GPT partition GUID with sfdisk --part-uuid/sgdisk --partition-guid.

Qemu config

Anything qemu related:

"qemu_binary_source_path": "/usr/bin/qemu-arm-static",
"qemu_binary_destination_path": "/usr/bin/qemu-arm-static"

Note: Ubuntu 26.04 (resolute) merged qemu-user-static into qemu-user and renamed the binaries to qemu-<arch> (e.g. /usr/bin/qemu-arm). On such hosts install qemu-user and qemu-user-binfmt, then point qemu_binary_source_path at the new name. qemu_binary_destination_path can stay as is; it only names the file inside the image and must match the binfmt registration, which still uses the -static names.

The arm instruction set (default=armv7l for qemu-arm-static) to be emulated can be defined via the QEMU_CPU variable. To switch to armv6l (check with uname -m as a provisioner command) run packer e.g. via:

QEMU_CPU=arm1176 packer build ...
docker run -e QEMU_CPU=arm1176 ...

Chroot provisioner

To execute command within chroot environment you should use chroot communicator:

"provisioners": [
 {
   "type": "shell",
   "inline": [
     "pacman-key --init",
     "pacman-key --populate archlinuxarm"
   ]
 }
]

DNS (resolv.conf) inside the chroot

The chroot shares the host kernel but not its /etc/resolv.conf, so DNS is often broken inside provisioners (see #144). On many images the file is also a dangling symlink (e.g. systemd-resolved pointing into /run), which is why bind-mounting the host file via image_chroot_mounts fails with mkdir .../etc/resolv.conf: file exists — that mechanism only works for directories.

Handle it in your provisioners instead: replace the file for the duration of the build and restore it afterwards, e.g. with a static nameserver (as done in boards/raspberry-pi/archlinuxarm.json):

provisioner "shell" {
  inline = [
    "mv /etc/resolv.conf /etc/resolv.conf.bak || true",
    "echo 'nameserver 8.8.8.8' > /etc/resolv.conf",
  ]
}

# ... your provisioners ...

provisioner "shell" {
  inline = [
    "rm -f /etc/resolv.conf",
    "mv /etc/resolv.conf.bak /etc/resolv.conf || true",
  ]
}

Or copy the host resolver configuration in and restore the original file at the end:

provisioner "shell" {
  inline = ["mv /etc/resolv.conf /etc/resolv.conf.bak || true"]
}
provisioner "file" {
  source      = "/etc/resolv.conf"
  destination = "/etc/resolv.conf"
}

# ... your provisioners ...

provisioner "shell" {
  inline = [
    "rm -f /etc/resolv.conf",
    "mv /etc/resolv.conf.bak /etc/resolv.conf || true",
  ]
}

Skip the restore step if the image should keep working DNS settings.

System services inside the chroot

The chroot has no target systemd, D-Bus, or NetworkManager daemon. Commands that need them, including the Ansible nmcli module, fail.

NetworkManager 1.42 and newer can create a keyfile offline:

umask 077
nmcli --offline connection add type wifi con-name my-wifi ssid my-ssid \
  wifi-sec.key-mgmt wpa-psk wifi-sec.psk my-password \
  > /etc/NetworkManager/system-connections/my-wifi.nmconnection

For older versions, write a root-owned 0600 keyfile directly; include security=802-11-wireless-security under [wifi] and credentials under [wifi-security]. Runtime commands such as systemctl start, hostnamectl, and timedatectl still need their daemons. systemctl enable UNIT works in a chroot; it is safer than hand-written links because it applies every [Install] directive. From the host, use systemctl --root=/tmp/<mountpoint> enable UNIT.

This plugin doesn't resize partitions on the base image. However, you can easily expand partition size at the boot time with a systemd service. Here you can find real-life example, where a raspberry pi root-fs partition expands to all available space on sdcard.

Flashing

To dump image on device you can use custom postprocessor (really wrapper around dd with some sanity checks):

"post-processors": [
 {
     "type": "flasher",
     "device": "/dev/sdX",
     "block_size": "4096",
     "interactive": true
 }
]

Other

Generating rootfs archive

While image (.img) format is useful for most cases, you might want to use rootfs for other purposes (ex. export to docker). This is how you can generate rootfs archive instead of image:

"image_path": "odroid-xu4.img" # generates image
"image_path": "odroid-xu4.img.tar.gz" # generates rootfs archive

Resizing image

Currently resizing is only limited to expanding single ext{2,3,4} partition with resize2fs. This is often requested feature where already built image is given and we need to expand the main partition to accommodate changes made in provisioner step (ie. installing packages).

To resize a partition you need to set image_build_method to resize mode and set selected partition size to 0, for example:

"builders": [
  {
    "type": "arm",
    "image_build_method": "resize",
    "image_partitions": [
      {
        "name": "boot",
        ...
      },
      {
        "name": "root",
        "size": "0",
        ...
      }
    ],
    ...
  }
]

Complete example:

boards/raspberry-pi/raspbian-resize.json

Notes:

Resize only expands. Set the top-level image_size larger than the base image; shrinking requires building a new image.
Exactly one ext2, ext3, or ext4 partition must have size set to 0. Otherwise the builder cannot select the partition to expand.
For "No space left on device", check df -h and df -i. Increase image_size only when the selected filesystem is out of blocks.

Export as Docker image

With the artifice plugin you can pass a rootfs archive to docker post-processors

"post-processors": [
    [{
        "type": "artifice",
        "files": ["rootfs.tar.gz"]
    },
    {
        "type": "docker-import",
        "repository": "mkaczanowski/archlinuxarm",
        "tag": "latest"
    }],
    ...
]

CI/CD

This is the live example on how to use github actions to push image to docker image registry:

cat .github/workflows/archlinuxarm-armv7-docker.yml

How is this plugin different from `solo-io/packer-builder-arm-image`

hashicorp/packer#8462

Examples

For more examples please see:

tree boards/

The repository also includes some arm typical scripts to e.g. resize partitions on first boot or more extensive provision scripts:

tree scripts/

A big resource for packer provisions scripts is the GitHub Actions runner images repository.

Troubleshooting

Many of the reported issues are platform/OS specific. If you happen to have problems, the first question you should ask yourself is:

Is my setup faulty? or is there an actual issue?

To answer that question, I'd recommend reproducing the error on the VM, for instance:

cd packer-plugin-builder-arm
vagrant up
vagrant provision

Note: For this the disksize plugin is needed if not already installed vagrant plugin install vagrant-disksize

Debugging builds

Enable verbose logging with:

PACKER_LOG=1 packer build ...

This builder does not pause for packer build -debug. Add a breakpoint before the suspect provisioner instead:

provisioner "breakpoint" {
  note = "Inspect the mounted image, then press Enter to continue"
}

While paused, find the root mountpoint in the log and inspect it from another terminal:

sudo chroot /tmp/<mountpoint> /bin/bash

Run the suspect commands there.

"Failed to find binfmt_misc for qemu-arm under /proc/sys/fs/binfmt_misc"

The plugin needs the qemu user-mode emulators registered with the kernel's binfmt_misc mechanism on the host. Install both QEMU and its registration package where available:

Older Debian/Ubuntu: sudo apt install qemu-user-static binfmt-support
Ubuntu 26.04 and other releases with unsuffixed binaries: sudo apt install qemu-user qemu-user-binfmt
Arch Linux: install qemu-user-static and qemu-user-static-binfmt
Fedora: sudo dnf install qemu-user-static qemu-user-binfmt, then run sudo systemctl restart systemd-binfmt.service
RHEL/Rocky 8: the official repositories do not provide those QEMU user-mode packages. Use another trusted source, register QEMU manually, or use this project's container.

This project's privileged container registers its bundled interpreters, so it needs no separate host setup. Check a registration with cat /proc/sys/fs/binfmt_misc/qemu-arm. qemu_binary_source_path must resolve to its interpreter file, such as /usr/bin/qemu-arm-static or /usr/bin/qemu-arm; symlinks work.

Name		Name	Last commit message	Last commit date
.github		.github
.web-docs		.web-docs
aur		aur
boards		boards
builder		builder
config		config
docker		docker
scripts		scripts
version		version
.dockerignore		.dockerignore
.editorconfig		.editorconfig
.gitignore		.gitignore
.golangci.yml		.golangci.yml
.goreleaser.yml		.goreleaser.yml
.pre-commit-config.yaml		.pre-commit-config.yaml
LICENSE		LICENSE
README.md		README.md
Vagrantfile		Vagrantfile
go.mod		go.mod
go.sum		go.sum
main.go		main.go

Navigation Menu

Repository navigation

About

Repository files navigation

Packer Plugin Builder ARM

Quick start

Run in Docker

Usage via container from Docker Hub:

Usage via local container build (supports amd64/aarch64 hosts):

Dependencies

Configuration

Remote file

Image config

Filesystem labels and UUIDs

Qemu config

Chroot provisioner

DNS (resolv.conf) inside the chroot

System services inside the chroot

Flashing

Other

Generating rootfs archive

Resizing image

Export as Docker image

CI/CD

How is this plugin different from `solo-io/packer-builder-arm-image`

Examples

Troubleshooting

Debugging builds

"Failed to find binfmt_misc for qemu-arm under /proc/sys/fs/binfmt_misc"

Demo

About

Releases

Packages

Used by

Contributors

Languages

Latest commit

History

Folders and files

Repository files navigation

Packer Plugin Builder ARM

Quick start

Run in Docker

Usage via container from Docker Hub:

Usage via local container build (supports amd64/aarch64 hosts):

Dependencies

Configuration

Remote file

Image config

Filesystem labels and UUIDs

Qemu config

Chroot provisioner

DNS (resolv.conf) inside the chroot

System services inside the chroot

Flashing

Other

Generating rootfs archive

Resizing image

Export as Docker image

CI/CD

How is this plugin different from solo-io/packer-builder-arm-image

Examples

Troubleshooting

Debugging builds

"Failed to find binfmt_misc for qemu-arm under /proc/sys/fs/binfmt_misc"

Demo

About

Topics

Resources

Stars

Watchers

Forks

Releases

Packages

Used by

Contributors

Languages

How is this plugin different from `solo-io/packer-builder-arm-image`