Use Recteq to interactively control your grill through Home Assistant.

Notice

This integration is not in any way, shape, or form supported by Recteq.

This project is largely based off the original codebase put together by @pdugas at https://github.com/pdugas/recteq. Please see that repository for setup instructions.

This integration will set up the following platforms.

Platform	Description
climate	Control the grill temperature and power state.
sensor	Report the target, actual, and probe temperatures.
switch	Turn the grill power on and off.

Installation

With HACS

1. Add this repository to HACS as a custom repository (category: Integration).
2. Install the Recteq integration.
3. Restart Home Assistant.

Manual

1. Using the tool of your choice, open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder), create a new folder called recteq.
4. Download all the files from the custom_components/recteq/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant.
7. In the HA UI, go to "Settings" -> "Devices and Services", click "+" and search for "Recteq".

Configuration is done in the UI

Contributions are welcome!

If you want to contribute to this, please read the Contribution guidelines.