Request Integrate Withrottle (Engine Drive) backend

[dlowe30971]

All, this request is to add the withrotte (Engine Driver) backend code to the ESP32 DCC++. An example is given by Vald here https://github.com/vhar/withrottle using an ESP01 and ESP8266. This would allow users to connect to the ESP32 using the Engine Driver app.

For your consideration,

[atanisoft]

This has been on the to-do list for a while. With the integrated LCC support coming in v1.2.0 (release soon) this may get implemented via that instead.

[dlowe30971]

Cool. Than look s Mike. Will ln look forward to testing. One question, the on board html page, do you have a picture of that? Dave, dlowe30971@live.com.au Mobile: +61 (0)432 493477

…

________________________________ From: atanisoft <notifications@github.com> Sent: Tuesday, February 12, 2019 1:52:39 PM To: atanisoft/DCCppESP32 Cc: David Lowe; Author Subject: Re: [atanisoft/DCCppESP32] Request Integrate Withrottle (Engine Drive) backend (#15) This has been on the to-do list for a while. With the integrated LCC support coming in v1.2.0 (release soon) this may get implemented via that instead. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fatanisoft%2FDCCppESP32%2Fissues%2F15%23issuecomment-462605154&data=02%7C01%7C%7C2296c06b56a34236f6b908d6909d8999%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636855403618687184&sdata=V2coVJwHvpzaqmli%2F7xysQW%2FPHeAWkSqwOP5wRUPAzw%3D&reserved=0>, or mute the thread<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAYJHe9LgNYGb4V6cEsowuBka7MNsxpdKks5vMjqHgaJpZM4a1a4e&data=02%7C01%7C%7C2296c06b56a34236f6b908d6909d8999%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636855403618697196&sdata=Y%2Fe9EjXbw%2FyRFNHz7M31Hrmmr0CmsCKZE8cjHgs1cS8%3D&reserved=0>.

[atanisoft]

Which board are you looking for?

[dlowe30971]

Hey Mike, I use the ESP32 Dev boards. But I may switch to the board that fits the Arduino motor shield. I am looking to add this system to a G Scale loco. Cheers,

…

________________________________ From: atanisoft <notifications@github.com> Sent: Tuesday, February 12, 2019 10:09:21 PM To: atanisoft/DCCppESP32 Cc: David Lowe; Author Subject: Re: [atanisoft/DCCppESP32] Request Integrate Withrottle (Engine Drive) backend (#15) Which board are you looking for? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fatanisoft%2FDCCppESP32%2Fissues%2F15%23issuecomment-462735615&data=02%7C01%7C%7Ccf64654c2cbb41039f2008d690e2ed0b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636855701638925624&sdata=ep2fj%2BnYEXCL41isF4yfPc%2F50%2F2DmpxHRS5lSuf1%2FM0%3D&reserved=0>, or mute the thread<https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAYJHe3y3fqlbxzDSgMSHJEHHgS9BiZsVks5vMq7xgaJpZM4a1a4e&data=02%7C01%7C%7Ccf64654c2cbb41039f2008d690e2ed0b%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636855701638935629&sdata=eaxgUNeKKOdKrL9O2wYoPlp2qux93wmL2fO8k0loY8I%3D&reserved=0>.

[atanisoft]

Ahh, yes I have one of the Arduino Uno form factor ESP32 boards. It does work decently but the pin mapping is a bit poor, the A0 and A1 pins are not usable for analog when WiFi is active so a jumper is required to A2/A3 or A4/A5.

Are you looking to have the CS setup inside the loco or powering the track/loco? If you are looking to power the track I'd suggest using a booster on the outputs from the ESP32/L298 so you are not limited to the max of ~1.75A (development branch, on master it is ~980mA).

If you are going to have the ESP32/L298 inside the loco then it should be less of a concern as the loco by itself shouldn't go beyond the 1.75A limit under normal circumstances.

[dlowe30971]

Inside the loco and powered by battery either in trailing wagon or loco itself depending on space. I have already proven ESP8266 + Uno + Motor Shield + to track (HO demo). I was able to connect and number of clients and control a number of locos. But I want to save a little more space so the ESP32 is a great option.

[atanisoft]

ok that makes sense, In that case the uno form factor with an L298 shield may work for your usecase, but a smaller esp32 with L298 may fit easier.