I am to say a novice, but withstanding I've learnt a lot whilst developing my project, I have an Atmel 1284P currently running a Modbus RTU slave stack that works very nicely. I want to attempt to use the BACnet
stack over MSTP, Mac address and instance ID, baud etc will all be configured from a small config file on an SD card.
My current application is written using Arduino C (in visual studio), I have tried to create a simple Bacnet net test and tried to compile it, I cannot however get it to compile, I have modified the hardware.h file
#ifndef HARDWARE_H
#define HARDWARE_H
#if !defined(F_CPU)
/* The processor clock frequency */
#define F_CPU 7372800UL
#endif
#if defined(IAR_SYSTEMS_ICC) || defined(IAR_SYSTEMS_ASM)|| (ICCAVR)
#include <iom1284p.h>
#else
#if !defined(AVR_ATmega1284P)
#error Firmware is configured for ATmega1284 only (-mmcu=atmega1284p)
#endif
#endif
#include "iar2gcc.h"
#include "avr035.h"
#define LED_NPDU_INIT() BIT_SET(DDRD, DDD5)
#define LED_NPDU_ON() BIT_CLEAR(PORTD, PD5)
#define LED_NPDU_OFF() BIT_SET(PORTD, PD5)
/* #define LED_NPDU PORTD_Bit5 /
/ #define LED_NPDU_OFF() {LED_NPDU = false;} /
/ #define LED_NPDU_ON() {LED_NPDU = true;} */
#define LED_GREEN_INIT() BIT_SET(DDRD, DDD4)
#define LED_GREEN_ON() BIT_CLEAR(PORTD, PD4)
#define LED_GREEN_OFF() BIT_SET(PORTD, PD4)
#endif
And this is the main application with the includes, I haven't written any code yet I just want to get the Stack to compile first, can anybody help me out here?
#include <ai.h>
#include <av.h>
#include <avr035.h>
#include <bv.h>
#include <device.h>
#include <hardware.h>
#include <iar2gcc.h>
#include <rs485.h>
#include <stack.h>
#include <stdbool.h>
#include <stdint.h>
#include <timer.h>
void setup() {
// put your setup code here, to run once:
}
void loop() {
// put your main code here, to run repeatedly:
}
I just want to use Bacnet over MSTP that's it.
Regards
John
I am to say a novice, but withstanding I've learnt a lot whilst developing my project, I have an Atmel 1284P currently running a Modbus RTU slave stack that works very nicely. I want to attempt to use the BACnet
stack over MSTP, Mac address and instance ID, baud etc will all be configured from a small config file on an SD card.
My current application is written using Arduino C (in visual studio), I have tried to create a simple Bacnet net test and tried to compile it, I cannot however get it to compile, I have modified the hardware.h file
#ifndef HARDWARE_H
#define HARDWARE_H
#if !defined(F_CPU)
/* The processor clock frequency */
#define F_CPU 7372800UL
#endif
#if defined(IAR_SYSTEMS_ICC) || defined(IAR_SYSTEMS_ASM)|| (ICCAVR)
#include <iom1284p.h>
#else
#if !defined(AVR_ATmega1284P)
#error Firmware is configured for ATmega1284 only (-mmcu=atmega1284p)
#endif
#endif
#include "iar2gcc.h"
#include "avr035.h"
#define LED_NPDU_INIT() BIT_SET(DDRD, DDD5)
#define LED_NPDU_ON() BIT_CLEAR(PORTD, PD5)
#define LED_NPDU_OFF() BIT_SET(PORTD, PD5)
/* #define LED_NPDU PORTD_Bit5 /
/ #define LED_NPDU_OFF() {LED_NPDU = false;} /
/ #define LED_NPDU_ON() {LED_NPDU = true;} */
#define LED_GREEN_INIT() BIT_SET(DDRD, DDD4)
#define LED_GREEN_ON() BIT_CLEAR(PORTD, PD4)
#define LED_GREEN_OFF() BIT_SET(PORTD, PD4)
#endif
And this is the main application with the includes, I haven't written any code yet I just want to get the Stack to compile first, can anybody help me out here?
#include <ai.h>
#include <av.h>
#include <avr035.h>
#include <bv.h>
#include <device.h>
#include <hardware.h>
#include <iar2gcc.h>
#include <rs485.h>
#include <stack.h>
#include <stdbool.h>
#include <stdint.h>
#include <timer.h>
void setup() {
// put your setup code here, to run once:
}
void loop() {
// put your main code here, to run repeatedly:
}
I just want to use Bacnet over MSTP that's it.
Regards
John