Harddrive missed and unknown message

[argawow]

Hi,
first, I am using this script a long time ago for now. Thanks for it :)

Since two days one of my harddrives are missing in the summary and I get a unknown message

Image with the missing drive:

Image without the missing drive.

Errormessage:
awk: newline in string 37267 newer... at source line 1 awk: newline in string Extended 19... at source line 1

Freenas dont have any errors about this drive at the moment. Poos is not degraded.

Thanks for help :)

[edgarsuit]

Does ada1 show up when you run sysctl -n kern.disks (as root)?

[argawow]

Hi,
here is the output of the command:

root@freenas:~ # sysctl -n kern.disks da0 ada7 ada6 ada5 ada4 ada3 ada2 ada1 ada0 cd0

[edgarsuit]

Gotcha, it shows up there, so that's good. The script then checks smartctl to see if SMART is enabled. Run smartctl -i /dev/ada1 and paste the output here.

[edgarsuit]

Sorry, is it /dev/ada1 that's missing? Or /dev/ada2?

[argawow]

/dev/ada2 is the missing one :)

here is the output of the command smartctl -i /dev/ada2

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD80EFZX-68UW8N0
Serial Number: xxxxxx
LU WWN Device Id: 5 000cca 254f61940
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 12 12:23:50 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Andreas

[edgarsuit]

Sorry, I missed the notification from your reply and this fell off my radar. I'm kind of at a loss for why this disk is getting excluded.

Try copying this whole block of code into your terminal and see what it spits out:

drives=$(for drive in $(sysctl -n kern.disks); do
    if [ "$(smartctl -i /dev/"${drive}" | grep "SMART support is: Enabled")" ] && ! [ "$(smartctl -i /dev/"${drive}" | grep "Solid State Device")" ]; then
        printf "%s " "${drive}"
    fi
done | awk '{for (i=NF; i!=0 ; i--) print $i }')
echo $drives

This is the code the script uses to figure out which drives should be included in the report. It looks at the smartctl output to check if SMART is enabled and to see if it's an SSD.

[ekaley]

Ive been having the same issue. It started when one of my drives started getting Current Pending Sectors errors. The error i got was
awk: newline in string 9648 newer... at source line 1 awk: newline in string Extended 17... at source line 1

and its excluded in the smart summary table that the script outputs. However smartctl and freenas can see the drive and the pool and disks all show up fine with the above commands and in the GUI

[ekaley]

I also tried https://github.com/Spearfoot/FreeNAS-scripts this smart report script and get the "same awk error". The interesting part with either this smart script or the one i linked is the script outputs is has the drive only excluded from the smart summary table not the details.

[ekaley]

[ekaley]

[Markvis]

@edgarsuit

ran into this today as well. issue comes from these two lines

FreeNAS-Report/report.sh

Line 311 in cfc6bcb

-v lastTestHours="$(smartctl -l selftest /dev/"$drive" | grep "# 1" | awk '{print $9}')" \

FreeNAS-Report/report.sh

Line 312 in cfc6bcb

-v lastTestType="$(smartctl -l selftest /dev/"$drive" | grep "# 1" | awk '{print $3}')" \

when a drive starts to have an error this command smartctl -l selftest /dev/"$drive | grep "# 1" will give something like this

# 1  Extended offline    Completed without error       00%     32284         -
12 of 12 failed self-tests are outdated by newer successful extended offline self-test # 1

so awk '{print $9}' will print

32284
newer

and awk '{print $3}'

Extended
12

Here's a sample output of smartctl -l selftest /dev/"$drive" for your reference

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE-p3 amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     32284         -
# 2  Short offline       Completed without error       00%     32275         -
# 3  Extended offline    Completed: read failure       10%     32125         3519067072
# 4  Conveyance offline  Completed without error       00%     32093         -
# 5  Short offline       Completed: read failure       60%     32069         3519067072
# 6  Extended offline    Completed: read failure       10%     31957         3519067072
# 7  Conveyance offline  Completed without error       00%     31925         -
# 8  Short offline       Completed: read failure       60%     31901         3519067072
# 9  Extended offline    Completed: read failure       10%     31790         3519067072
#10  Conveyance offline  Completed without error       00%     31758         -
#11  Short offline       Completed: read failure       70%     31734         3519067072
#12  Extended offline    Completed: read failure       10%     31625         3519067072
#13  Conveyance offline  Completed without error       00%     31590         -
#14  Short offline       Completed: read failure       60%     31566         3519067072
#15  Extended offline    Interrupted (host reset)      10%     31458         -
#16  Conveyance offline  Completed without error       00%     31422         -
#17  Short offline       Completed: read failure       10%     31400         3519067072
#18  Extended offline    Completed: read failure       10%     31289         3519067072
#19  Conveyance offline  Completed without error       00%     31255         -
#20  Short offline       Completed: read failure       60%     31231         3519067072
#21  Extended offline    Completed: read failure       10%     31120         3519067072
12 of 12 failed self-tests are outdated by newer successful extended offline self-test # 1

[dak180]

@Markvis could you let me know if my refactor fixes your issue?

[jamesstanw]

I also face the same issue with 3 drives being skipped. If I've got it - I should move over to the refactor?

[dak180]

@jamesstanw try it and let me know if it works.

[jamesstanw]

sdsds

@jamesstanw try it and let me know if it works.

I've called the script with:
/bin/sh ./service.sh
and it reports:
root@freenas:/mnt/NAS2/NAS2_data/james/scripts # /bin/sh ./service.sh ./service.sh: 73: Syntax error: "(" unexpected
Removing the brackets at line 73 -- sorry I'm poking in the dark here -- shows this:
./service.sh: function: not found ./service.sh: cannot create : No such file or directory Please edit the config file for your setup